Tutelle du CNRSLaboratoire des Composites Thermo Structuraux UMR5801

LCTS

Nos tutelles

  • Tutelle du CNRS
  • Tutelle 2
  • Tutelle 3

Rechercher

Publications Majeures

Performance assessment of the augmented finite element method for the modelling of weak discontinuities

International Journal for Numerical Methods in Engineering [2021]
Essongue, S.; Couégnat, G.; Martin, E.

Design and finite element assessment of a Fully-Uncoupled Multi-Directional (FUMD) specimen for delamination tests

Journal of Composite Materials [2020]
Garulli, T.; Catapano, A.; Fanteria, D.; Jumel, J.; Martin, E.

Numerical implementation of the coupled criterion: matched asymptotic and full finite element approaches

Finite Elements in Analysis and Design [2020]
Doitrand, A.; Martin, E.; Leguillon, D.

Computation of generalized stress intensity factors of 3D singularities

International Journal of Solids and Structures [2020]
Doitrand, A.; Leguillon, D.; Martin, E.

Experimental assessment of Fully-Uncoupled Multi-Directional specimens for mode I delamination tests

Composites Science and Technology [2020]
Garulli, T.; Catapano, A.; Fanteria, D.; Huang, W.; Jumel, J.; Martin, E.

Prediction of interfacial debonding between stiff spherical particles and a soft matrix with the coupled criterion

Theoretical and Applied Fracture Mechanics [2020]
Martin, E.; Leguillon, D.; Catapano, A.; Carrère, N.

Numerical implementation of the coupled criterion for damaged materials

International Journal of Solids and Structures [2019]
Li, J.; Leguillon, D.; Martin, E.; Zhang, X.-B.

What is the tensile strength of a ceramic to be used in numerical models for predicting crack initiation?

International Journal of Fracture [2018]
Leguillon, D.; Martin, E.; Sevecek, O.; Bermejo, R.

A finite fracture model for the analysis of multi-cracking in woven ceramic matrix composites

Composites Part B: Engineering [2018]
Li, J.; Martin, E.; Leguillon, D.; Dupin, C.

Prediction of multi-cracking in sub-micron films using the coupled criterion

International Journal of Fracture [2018]
Leguillon, D.; Martin, E.

What is the tensile strength of a ceramic to be used in numerical models for predicting crack initiation?

Int. J. Fract [2018]
Leguillon, D.; Martin, E.; Sevecek, O.; Bermejo, R.

Understanding the tensile strength of ceramics in the presence of small critical flaws

Engineering Fracture Mechanics [2018]
Martin, E.; Leguillon, D.; Sevecek, O.; Bermejo, R.

Multi-cracking in brittle thin layers and coatings using a FFM model

European Journal of Mechanics A/Solids [2017]
Leguillon, D.; Li, J.; Martin, E.

Initiation of edge debonding: coupled criterion versus cohesive zone model

International Journal of Fracture [2016]
Martin, E.; Vandellos, T.; Leguilllon, D.; Carrère, N.

Modelling of edge crack formation and propagation in ceramic laminates using the stress–energy coupled criterion

Engineering Fracture Mechanics [2016]
Sevecek, O.; Kotoul, M.; Leguillon, D.; Martin, E.; Bermejo, R.

Edge cracking due to a compressive residual stress in ceramic laminates

Comptes Rendus Mécanique [2015]
Leguillon, D.; Sevecek, O.; Martin, E.; Bermejo, R.

Flexural vs. tensile strength in brittle materials

Comptes Rendus Mécanique [2015]
Leguillon, D.; Martin, E.; Lafarie-Frenot, M.-C.

A strain energy density criterion for the initiation of edge debonding

Theoretical and Applied Fracture Mechanics [2015]
Martin, E.; Leguillon, D.

Edge cracking due to a compressive residual stress in ceramic laminates

Comptes Rendus Mécanique [2015]
Leguillon, D.; Sevecek, O.; Martin, E.; Bermejo, R.

Comparison between models based on a coupled criterion for the prediction of the failure of adhesively bonded joints

Engineering Fracture Mechanics [2015]
Carrère, N.; Martin, E.; Leguillon, D.

Application of the coupled stress-energy criterion to predict the fracture behavior of layered ceramics designed with internal compressive stresses

European Journal of Mechanics A/Solids [2015]
Leguillon, D.; Martin, E.; Sevecek, O.; Bermejo, R.

Understanding the edge crack phenomenon in ceramic laminates

Frattura ed Integrita' strutturale [2015]
Sevecek, O.; Kotoul, M.; Leguillon, D.; Martin, E.; Bermejo, R.

Mechanical properties of SiC/SiC braided tubes for fuel cladding

Journal of Nuclear Materials [2014]
Rohmer, E.; Martin, E.; Lorrette, C.

The strengthening effect caused by an elastic contrast--part I: the bimaterial case

International Journal of Fracture [2013]
Leguillon, D.; Martin, E.

The strengthening effect caused by an elastic contrast--part II: stratification by a thin stiff layer

International Journal of Fracture [2013]
Leguillon, D.; Martin, E.

Damage analysis of thin 3D-woven SiC/SiC composite under low velocity impact loading

Composites Part A: Applied Science and Manufacturing [2012]
Herb, V.; Martin, E.; Couégnat, G.

A Brazilian Disk Test for the Evaluation of the Shear Strength of Epoxy-Joined Ceramics

International Journal of Applied Ceramic Technology [2012]
Martin, E.; Pavia, F.; Ventrella, A.; Avalle, M.; Lara-Curzio, E.; Ferraris, M.

A coupled strength and toughness criterion for the prediction of the open hole tensile strength of a composite plate

International Journal of Solids and Structures [2012]
Martin, E.; Leguillon, D.; Carrère, N.

Characterization and damaging law of CFC for high heat flux actively cooled plasma facing components

Journal of Nuclear Materials [2011]
Chevet, G.; Martin, E.; Boscary, J.; Camus, G.; Herb, V.; Schlosser, J.; Escourbiac, F.; Missirlian, M.

Development of a Macroscopic Damage Model for Woven Ceramic Matrix Composites

International Journal of Damage Mechanics [2011]
Marcin, L.; Maire, J.-F.; Carrère, N.; Martin, E.

Virtual material approach to self-healing CMCs

EUCASS 2011 Proceedings [2011]
COUÉGNAT, G.; DRÉAN, V.; ROS, W.; MARTIN, E.; RICCHIUTO, M.; C. GERMAIN, C.; CATALDI, M.; VIGNOLES, G. L.

Damage assessment of thin SiC/SiC composite plates subjected to quasi-static indentation loading

Composites Part A: Applied Science and Manufacturing [2010]
Herb,V; Couégnat, G; Martin, E

Comparison of shear strength tests on AV119 epoxy-joined carbon/carbon composites

Composites Part B: Engineering [2010]
Ferraris, M.; Ventrella, A.; Salvo, M.; Avalle, M.; Pavia, F.; Martin, E.

A twofold strength and toughness criterion for the onset of free-edge shear delamination in angle-ply laminates

International Journal of Solids and Structures [2010]
Martin, E.; Leguillon, D.; Carrère, N.

In situ fibre strength determination in metal matrix composites

Composites Science and Technology [2009]
Rousset, G.; Martin, E.; Lamon, J.

Approche multiéchelle du comportement mécanique des matériaux composites à renfort tissé

9ème Colloque National en Calcul de Structure [2009]
Couégnat, G.; Martin, E.; Lamon, J.; Carrère, N.

Prediction of crack deflection in porous/dense ceramic laminates

Journal of the European Ceramic Society [2006]
Leguillon, D.; Tariolle, S.; Martin, E.; Chartier, T.; Besson, J.

Energetic conditions for interfacial failure in the vicinity of a matrix crack in brittle matrix composites

International Journal of Solids and Structures [2004]
Martin, E.; Leguillon, D.

Creep behaviour of a unidirectional SM1140+/Ti-6242 composite

Composites Part A [2003]
Carrere, N.; Martin, E. ; Coutand, B.

Fracture behaviour of model silicon carbide filaments

Composites Sci & Technol [2001]
Faucon, A. ; Lorriot, T.; Martin, E. ; Auvray, S. ; Le Petitcorps, Y. ;Dyos, K. ; Shatwell, R.A.

Interfacial zone design in titanium-matrix composites reinforced by SiC filaments

Composites Sci Technol [1996]
Fromentin, J.-F. ; Debray,K. ; Le Petitcorps, Y. ; Martin, E.; Quenisset, J.-M.

Haut de page