Tutelle du CNRSLaboratoire des Composites Thermo Structuraux UMR5801

LCTS

Nos tutelles

  • Tutelle du CNRS
  • Tutelle 2
  • Tutelle 3

Rechercher

Publications Majeures

Oxidation/corrosion of BN-based coatings as prospective interphases for SiC/SiC composites

Journal of the European Ceramic Society [2021]
Carminati, P.; Jacques, S.; Rebillat, F.

Monitoring damage evolution of ceramic matrix composites during tensile tests using electrical resistivity: Crack density-based electromechanical model

Journal of the European Ceramic Society [2021]
Goulmy, J.-P.; Camus, G.; Rebillat, F.

Characterization of the oxidation of C/C/SiC composites by X-ray micro-tomography

Journal of the European Ceramic Society [2020]
Goulmy, J.-P.; Caty, O.; Rebillat, F.

Effect of high-content Yttria on the thermal expansion behaviour and ionic conductivity of a stabilised cubic Hafnia

Journal of the European Ceramic Society [2020]
Sévin, L.; Razafindramanana, V.; Julian-Jankowiak, A.; Justin, J.-F.; Mauvy, F.; Rebillat, F.

Oxidation of ß-SiC at high temperature in Ar/O2, Ar/CO2, Ar/H2O gas mixtures: active/passive transition

Journal of the European Ceramic Society [2018]
Brisebourg, M. Q. ; Rebillat, F.; Teyssandier, F.

Oxidation of ß-SiC at high temperature in Ar/O2, Ar/CO2, Ar/H2O gas mixtures: Kinetic study of the silica growth in the passive regime

Journal of the European Ceramic Society [2018]
Brisebourg, M. Q.; Rebillat, F.; Teyssandier, F.

Low pressure chemical vapour deposition of BN: Relationship between gas phase chemistry and coating microstructure

Thin Solid Films [2018]
Carminati, P; Buffeteau, T.; Daugey, N.; Chollon, G.; Rebillat, F.; Jacques, S.

Identification of Complex Oxidation/Corrosion Behaviours of Boron Nitride Under High Temperature

Oxidation of Metals [2017]
Willemin, S.; Carminati, P.; Jacques, S.; Roger, J.; Rebillat, F.

Influence of the Cooling Temperature on the Mechanical Behavior of an Oxidized Self-Healing Ceramic Matrix Composite

Oxidation of metals [2017]
Bertrand, R.; Camus, G.; Henne, J.-F.; Rebillat, F.

Electrical resistivity monitoring of a SiC/[Si-B-C] composite under oxidizing environments

Acta Materialia [2017]
Simon, C.; Rebillat, F.; Camus, G.

Monitoring damage evolution of SiCf/[SiBC]m composites using electrical resistivity: Crack density-based electromechanical modeling

Acta Materialia [2017]
Simon, C.; Rebillat, F.; Herb, V.; Camus, G.

Modeling of Simultaneous Oxidation and Volatilization Phenomena Along a Crack in a Self-Healing Multi-constituent Material

Oxidation of Metals [2017]
Simon, C.; Camus, G.; Bouillon, F.; Rebillat, F.

Oxidation behavior at moderate temperature under dry and wet air of phenolic resin-derived carbon

Thermochimica Acta [2017]
Bertran, X.; Chollon, G.; Dentzer, J.; Gadiou, R.; Fouquet, S.; Dourges, M.-A.; Rebillat, F.

In-situ tensile tests under SEM and X-ray computed micro-tomography aimed at studying a self-healing matrix composite submitted to different thermomechanical cycles

Journal of the European Ceramic Society [2017]
Bertrand, R.; Caty, O.; Mazars, V.; Denneulin, S.; Weisbecker, P.; Pailhès, J.; Camus, G.; Rebillat, F.

Definition of Optimized Conditions to Extract Accurate Kinetic Laws from TGA Experiments: Modeling and Validation

Oxidation of metals [2017]
Zancanaro, M.; Bertrand, N.; Rebillat, F.

Application of X-ray computed micro-tomography to the study of damage and oxidation kinetics of thermostructural composites

Nuclear Instruments and Methods in Physics Research B [2014]
Caty, O.; Ibarroule, P.; Herbreteau, M.; Rebillat, F.; Maire, E.; Vignoles, G. L.

A Multi-Scale Approach of Degradation Mechanisms inside a SiC(f)/Si-B-C(m) Based Self-Healing Matrix Composite in a Dry Oxidizing Environment

Oxidation of Metals [2013]
Nualas F.; Rebillat F.

Influence of an O2 type oxidizing environment on SiC/SiC composites: properties/microstructure relationship

Oxidation of metals [2013]
Torres, E.; Lorrette, C.; Weisbecker, P.; Sauder, C.; Cabet, C.; Riccetti, B.; Briottet, L.; Rebillat, F.

Oxidation Behavior of PAN-based Carbon Fibers and the Effect on Mechanical Properties

Oxidation of Metals [2013]
Bertran, X; Labrugère, C; Dourges, M-A; Rebillat, F

A New Experimental Apparatus for In-Situ Characterization of Silica Growth During Passive Corrosion of SiC at Very High Temperatures

oxidation of metals [2013]
Brisebourg, M. Q.; REBILLAT, F.; Teyssandier, F.

Carbon fiber/reaction-bonded carbide matrix for composite materials – Manufacture and characterization

Journal of the European Ceramic Society [2012]
Magnant, J; Maillé, L; Pailler, R; Ichard, J; Guette, A; Rebillat, F; Philippe, E

Oxidation of refractory metallic coatings on carbon fibers heated up to 1850°C

Surface and Coatings Technology [2010]
Andreani, A.-S. ; Poulon-Quintin, A. ; Rebillat, F.

Optimization of Ceramic Matrix Composite Composition for High Temperature Lifetime Improvement

Proceedings - 7th International Conference on High Temperature Ceramic Matrix Composites (HT-CMC 7), September 20 – 22, 2010 in Bayreuth, Germany [2010]
A. Griesser, S. Jacques, F. Rebillat

Modelisation multi-echelle de l ablation de composites carbone/carbone

Chocs Avancées [2008]
Vignoles, G. L.; Lachaud, J.; Aspa, Y.; Quintard, M.; Goyénèche, J.-M.; Epherre, J.-F.; Descamps, C.; Plazanet, F.; Bertrand, N.; Bourget, G.; Rebillat, F.; Vancrayenest, B.; Alrivie, M.; Weisbecker, P.; Dages, M.; Potdevin, L.

Self-healing mechanisms of a SiC fiber reinforced multi-layered ceramic matrix composite in high pressure steam environments

Journal of the European Ceramic Society [2007]
Quemard, L.; Rebillat, F.; Guette, A.; Tawil, H.; Louchet-Pouillerie, C.

Degradation mechanisms of a SiC fiber reinforced self-sealing matrix composite in simulated combustor environments

Journal of the European Ceramic Society [2007]
Quemard, L.; Rebillat, F.; Guette, A.; Tawil, H.; Louchet-Pouillerie, C.

Microstructural and microtextural investigations of boron nitride deposited from BCl3-NH3-H2 gas mixtures

Journal of the European Ceramic Society [2004]
Le Gallet, S.; Chollon, G.; Rebillat, F.; Guette, A.; Bourrat, X.; Naslain, R.; Couzi, M.; Bruneel, J.L.

Influence of a multilayered matrix on the lifetime of SiC/BN/SiC minicomposites

Journal of Materials Science [2004]
Le Gallet, S.; Rebillat, F.; Guette, A.; Bourrat, X.; Doux, F.

Oxidation mechanisms and kinetics of SiC-matrix composites and their constituents

Journal of Materials Science [2004]
Naslain, R.; Guette, A.; Rebillat, F.; Le Gallet, S.; Lamouroux, F.; Filipuzzi, L.; Louchet, C.

Investigation of the Young's modulus of TiB needles in situ produced in titanium matrix composite

Materials Science and Engineering A [2003]
Gorsse, S.; Le Petitcorps, Y; Matar, S.; Rebillat, F.

STIM tomography : a potential tool for the non-destructive characterisation of SiC microcomposite materials

Nuclear Instruments and Methods in Physics Research B [2001]
A. Guette ; C. Michelet ; F. Rebillat ; G. Vignoles ; P. Moretto ; S. Le Gallet

The concept of a strong interface applied to SiC/SiC composites with a BN interphase

Acta Materialia [2000]
A. Guette ; F. REBILLAT ; J. LAMON

Chemical and mechanical alterations of SiC Nicalon fiber properties during the CVD/CVI process for boron nitride

Acta Materialia [1999]
REBILLAT F. ; GUETTE A. ; ROBIN-BROSSE C.

Interface properties in high-strength nicalon / C / SiC composites as determined by rough surface analysis of fiber push-out tests.

J. Amer Ceram Soc [1998]
KERANS RONALD J. ; LAMON JACQUES ; PARTHASARATHY TRIPLICANE A. ; REBILLAT FRANCIS

INTERFACIAL BOND STRENGTH IN SiC/C/SiC COMPOSITE MATERIALS AS STUDIED BY SINGLE-FIBER PUSH-OUT TESTS

Journal of the American Ceramic Society [1998]
LAMON JACQUES ; NASLAIN ROGER ; REBILLAT FRANCIS

Properties of multilayered interphases in SiC/SiC chemcial vapor infiltrated composites with weak and strong interfaces

J. Amer Ceram Soc [1998]
LAMON J. ; NASLAIN R. ; REBILLAT F.

Oxidation resistance of SiC/SiC micro and minicomposites with a highly crystallised BN interphase

J European Ceram Soc [1998]
DEBIEUVRE C. ; ESPITALIER L. ; GUETTE A. ; NASLAIN R. ; REBILLAT F.

FIBER-MATRIX INTERFACE PROPERTIES OF SINGLE-FIBER MICROCOMPOSITES AS MEASURED BY FIBER PUSHIN TESTS

J European Ceram Soc [1997]
KERANS R.J. ; LAMON J. ; REBILLAT F.

HIGHLY ORDERED PYROLYTIC BN OBTAINED BY LPCVD

J. EUROPEAN CERAMIC SOCIETY [1997]
GUETTE A. ; NASLAIN R. ; REBILLAT F. ; ROBIN BROSSE C.

Analyses of fiber push-out tests performed on nicalon/SiC composites with tailored interfaces

Composites Engineering [1995]
HSUEH C.H. ; LAMON J. ; LARACURZIO E. ; REBILLAT F.

Microcomposite test procedure for evaluating the interface properties of ceramic matrix composites

Journal of the American Ceramic Society [1995]
Lamon, J.; Rebillat, F.; Evans, A. G.

Haut de page